Contact
    Start Publications High flux and fouling resistant flat sheet polyethersulfone ...
    ←  Publication Finder
    Attension

    High flux and fouling resistant flat sheet polyethersulfone membranes incorporated with graphene oxide for ultrafiltration applications

    Year: 2018

    Journal: Chem. Eng. J., Volume 334, FEB 15, page 789–799

    Authors: Abdel-Karim, Ahmed; Leaper, Sebastian; Alberto, Monica; Vijayaraghavan, Aravind; Fan, Xiaolei; Holmes, Stuart M.; Souaya, Eglal R.; Badawy, Mohamed I.; Gorgojo, Patricia

    Organizations: EPSRC [EP/K016946/1]; Ministry of Higher Education (MoHE) of Egypt; Newton-Mosharaffa Fund, Egypt; Newton-Mosharaffa Fund, UK

    Keywords: Graphene oxide; Membrane fouling; Mixed matrix membranes; Ultrafiltration membranes

    In this work, graphene oxide (GO) was combined with polyethersulfone (PES) to form mixed matrix membranes (MMMs) for ultrafiltration of aqueous solutions. Also, the effect of adding various pore formers (poly(vinylpyrrolidinone (PVP), reverse triblock Pluronic (P31R1), and poloxamine Tetronic (T904)) to the dope solution was investigated. The prepared MMMs were characterised using various techniques, including Fourier-transform infrared spectroscopy, scanning electron microscopy and atomic force microscopy. It was found that the incorporation of 0.5 wt% of GO increased the flux from 2 to 13 L m(-2) h(-1) (LMH) and the rejection of bovine serum albumin (BSA) from 89.2 to 97% compared to benchmark PES membranes. SEM analysis revealed the increased pore size and porosity of the GO modified membranes, which contributed to the increased flux. The addition of pore formers further increased the flux compared to pure PES and also displayed synergistic effects with GO. The combination of T904 with 0.3 wt% GO increased the water flux significantly from 2 to 245 LMH and increased the rejection of acridine orange (from 40.5 to 48.4%) and BSA (from 89.6 to 93.3%), respectively. Also, fouling properties of the membranes were investigated with the parameters: flux recovery ratio (FRR), total flux decline ratio (R-t), reversible flux decline ratio (R-r), and irreversible flux decline ratio (R-ir), and improved anti-fouling properties were obtained with the addition of GO. This work shows the promise of GO as a performance- enhancing additive in MMMs for wastewater treatment.
    View publication