Start Publications Improving Nanofiber Membrane Characteristics and Membrane ...
Attension

Improving Nanofiber Membrane Characteristics and Membrane Distillation Performance of Heat-Pressed Membranes via Annealing Post-Treatment

Year: 2017

Journal: Appl. Sci.-Basel, Volume 7, JAN

Authors: Yao, Minwei; Woo, Yun Chul; Tijing, Leonard D.; Cesarini, Cecilia; Shon, Ho Kyong

Organizations: Industrial Facilities & Infrastructure Research Program - Ministry of Land, Infrastructure and Transport of the Korean government [16IFIP-B065893-04]; ARC Future Fellowship [FT140101208]; UTS FEIT Blue Sky Research Fund

Keywords: membrane distillation; post-treatment; annealing; PVDF-HFP; crystallinity

Electrospun membranes are gaining interest for use in membrane distillation (MD) due to their high porosity and interconnected pore structure; however, they are still susceptible to wetting during MD operation because of their relatively low liquid entry pressure (LEP). In this study, post-treatment had been applied to improve the LEP, as well as its permeation and salt rejection efficiency. The post-treatment included two continuous procedures: heat-pressing and annealing. In this study, annealing was applied on the membranes that had been heat-pressed. It was found that annealing improved the MD performance as the average flux reached 35 L/m(2)h or LMH (>10% improvement of the ones without annealing) while still maintaining 99.99% salt rejection. Further tests on LEP, contact angle, and pore size distribution explain the improvement due to annealing well. Fourier transform infrared spectroscopy and X-ray diffraction analyses of the membranes showed that there was an increase in the crystallinity of the polyvinylidene fluoride-co-hexafluoropropylene (PVDF-HFP) membrane; also, peaks indicating the phase of polyvinylidene fluoride (PVDF) became noticeable after annealing, indicating some and amorphous states of polymer were converted into the phase. The changes were favorable for membrane distillation as the non-polar phase of PVDF reduces the dipolar attraction force between the membrane and water molecules, and the increase in crystallinity would result in higher thermal stability. The present results indicate the positive effect of the heat-press followed by an annealing post-treatment on the membrane characteristics and MD performance.