Contact
    Start Publications Production and characterization of a new biosurfactant from ...
    ←  Publication Finder
    Attension

    Production and characterization of a new biosurfactant from Pseudomonas cepacia grown in low-cost fermentative medium and its application in the oil industry

    Year: 2017

    Journal: Biocatal. Agric. Biotechnol., Volume 12, OCT, page 206–215

    Authors: Soares da Silva, Rita de Cassia F.; Almeida, Darne G.; Meira, Hugo M.; Silva, Elias J.; Farias, Charles B. B.; Rufino, Raquel D.; Luna, Juliana M.; Sarubbo, Leonie A.

    Organizations: Foundation for the Support of Science and Technology of the State of Pernambuco (FACEPE); National Council for Scientific and Technological Development (CNPq); Coordination for the Improvement of Higher Level Education Personnel (CAPES); Development Program from National Agency of Electrical Energy (ANEEL)

    Keywords: Biosurfactant; Pseudomonas; Environment; Oil; Surface tension; Toxicity

    The production of a biosurfactant by Pseudomonas cepacia CCT6659 was studied in a low-cost medium formulated with 2% waste frying oil, 3% corn steep liquor and 0.2% NaNO3 for 60 hs at 28 degrees C and 250 rpm. Biosurfactant production was growth associated, as indicated by the growth and biosurfactant production kinetics. The surface tension of the medium was reduced from 65 mN/m to less than 25.5 mN/m. The properties of the biosurfactant that was separated by acid precipitation and solvent extraction were investigated and its critical micelle concentration was determined as 600 mg/L. Preliminary chemical characterization revealed the anionic nature of the biosurfactant. The biosurfactant was characterized by Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance ((1) H NMR) and gas chromatography and mass spectroscopy (CG-MS). Biosurfactant demonstrated good surface tension reduction capacity and emulsifying activity with motor oil (up to 90%). The biosurfactant also demonstrated stability during exposure to high temperatures (up to 120 degrees C for 15 min), high salinity (12% NaCl) and a wide pH range (2-12). The crude biosurfactant was not toxic to the microcrustacean Artemia salina or two Brassica oleracea plant species. The crude biosurfactant was effective at recovering up to 75% of the residual oil from sand samples, at displacing oil (81%) and recovering up to 90% of motor oil from the walls of beakers. These results indicate the potential value of this biosurfactant for application in the oil industry, especially in enhanced oil recovery, tank cleaning and the bioremediation of spills at sea and soil.
    View publication