Contact
    Start Publications 3D Printing Manufacturing of Polydimethyl-Siloxane/Zinc Oxide ...
    ←  Publication Finder
    Attension

    3D Printing Manufacturing of Polydimethyl-Siloxane/Zinc Oxide Micro-Optofluidic Device for Two-Phase Flows Control

    Year: 2022

    Journal: Polymers, Volume 14, MAY

    Authors: Stella, Giovanna; Barcellona, Matteo; Saitta, Lorena; Tosto, Claudio; Cicala, Gianluca; Gulino, Antonino; Bucolo, Maide; Fragala, Maria Elena

    Organizations: Universita degli Studi di Catania under the Grant Scheme Piano di incentivi per la ricerca di Ateneo 2020/2022 (Pia.ce.ri.); Italian MIUR [20179SWLKA]

    Keywords: polydimethyl-siloxane (PDMS); ZnO; microfluidic; 3D printing; surface functionalization

    Tailored ZnO surface functionalization was performed inside a polydimethyl-siloxane (PDMS) microchannel of a micro-optofluidic device (mofd) to modulate its surface hydrophobicity to develop a method for fine tuning the fluid dynamics inside a microchannel. The wetting behavior of the surface is of particular importance if two different phases are used for system operations. Therefore, the fluid dynamic behavior of two immiscible fluids, (i) air-water and (ii) air-glycerol/water in PDMS mofds and ZnO-PDMS mofds was investigated by using different experimental conditions. The results showed that air-glycerol/water fluid was always faster than air-water flow, despite the microchannel treatment: however, in the presence of ZnO microstructures, the velocity of the air-glycerol/water fluid decreased compared with that observed for the air-water fluid. This behavior was associated with the strong ability of glycerol to create an H-bond network with the exposed surface of the zinc oxide microparticles. The results presented in this paper allow an understanding of the role of ZnO functionalization, which allows control of the microfluidic two-phase flow using different liquids that undergo different chemical interactions with the surface chemical terminations of the microchannel. This chemical approach is proposed as a control strategy that is easily adaptable for any embedded micro-device.
    View publication