Contact
    Start Publications A Mild Method for Surface-Grafting PEG Onto Segmented ...
    ←  Publication Finder
    Attension

    A Mild Method for Surface-Grafting PEG Onto Segmented Poly(Ester-Urethane) Film with High Grafting Density for Biomedical Purpose

    Year: 2018

    Journal: Polymers, Volume 10, OCT

    Authors: Liu, Lulu; Gao, Yuanyuan; Zhao, Juan; Yuan, Litong; Li, Chenglin; Liu, Zhaojun; Hou, Zhaosheng

    Organizations: Shandong Provincial Natural Science Foundation, China [201810445115]

    Keywords: segmented poly(ester-urethane); poly(ethylene glycol); surface grafting; chemical treatment; high grafting density; hemocompatibility

    In the paper, poly(ethylene glycol) (PEG) was grafted on the surface of poly(ester-urethane) (SPEU) film with high grafting density for biomedical purposes. The PEG-surface-grafted SPEU (SPEU-PEG) was prepared by a three-step chemical treatment under mild-reaction conditions. Firstly, the SPEU film surface was treated with 1,6-hexanediisocyanate to introduce -NCO groups on the surface with high density (5.28 x 10(-7) mol/cm(2)) by allophanate reaction; subsequently, the -NCO groups attached to SPEU surface were coupled with one of -NH2 groups of tris(2-aminoethyl)amine via condensation reaction to immobilize -NH2 on the surface; finally, PEG with different molecular weight was grafted on the SPEU surface through Michael addition between terminal C = C bond of monoallyloxy PEG and -NH2 group on the film surface. The chemical structure and modified surface were characterized by FT-IR, H-1 NMR, X-ray photoelectron spectroscopy (XPS), and water contact angle. The SPEU-PEGs displaying much lower water contact angles (23.9-21.8 degrees) than SPEU (80.5 degrees) indicated that the hydrophilic PEG chains improved the surface hydrophilicity significantly. The SPEU-PEG films possessed outstanding mechanical properties with strain at break of 866-884% and ultimate stress of 35.5-36.4 MPa, which were slightly lower than those of parent film, verifying that the chemical treatments had minimum deterioration on the mechanical properties of the substrate. The bovine serum albumin adsorption and platelet adhesion tests revealed that SPEU-PEGs had improved resistance to protein adsorption (3.02-2.78 g/cm(2)) and possessed good resistance to platelet adhesion (781-697 per mm(2)), indicating good surface hemocompatibility. In addition, due to the high grafting density, the molecular weight of surface-grafted PEG had marginal effect on the surface hydrophilicity and hemocompatibility.
    View publication