Contact
    Start Publications A UV-cured nanofibrous membrane of vinylbenzylated ...
    ←  Publication Finder
    Attension

    A UV-cured nanofibrous membrane of vinylbenzylated gelatin-poly(epsilon-caprolactone) dimethacrylate co-network by scalable free surface electrospinning

    Year: 2018

    Journal: Mater. Sci. Eng. C-Mater. Biol. Appl., Volume 91, OCT 1, page 541–555

    Authors: Bazbouz, Mohamed Basel; Liang, He; Tronci, Giuseppe

    Organizations: Clothworkers' Centre for Textile Materials Innovation for Healthcare (CCTMIH); EPSRC-University of Leeds Impact Acceleration Account; EPSRC Centre for Innovative Manufacturing in Medical Devices Fresh Ideas Fund

    Keywords: Free surface electrospinning; Gelatin; Poly(epsilon-caprolactone); Nanofibres; Photo-crosslinking; Co-network

    Electrospun nanofibrous membranes of natural polymers, such as gelatin, are fundamental in the design of regenerative devices. Crosslinking of electrospun fibres from gelatin is required to prevent dissolution in water, to retain the original nanofibre morphology after immersion in water, and to improve the thermal and mechanical properties, although this is still challenging to accomplish in a controlled fashion. In this study, we have investigated the scalable manufacture and structural stability in aqueous environment of a UV-cured nanofibrous membrane fabricated by free surface electrospinning (FSES) of aqueous solutions containing vinylbenzylated gelatin and poly(epsilon-caprolactone) dimethacrylate (PCL-DMA). Vinylbenzylated gelatin was obtained via chemical functionalisation with photopolymerisable 4-vinylbenzyl chloride (4VBC) groups, so that the gelatin and PCL phase in electrospun fibres were integrated in a covalent UV-cured co-network at the molecular scale, rather than being simply physically mixed. Aqueous solutions of acetic acid (90 vol%) were employed at room temperature to dissolve gelatin-4VBC (G-4VBC) and PCL-DMA with two molar ratios between 4VBC and DMA functions, whilst viscosity, surface tension and electrical conductivity of resulting electrospinning solutions were characterised. Following successful FSES, electrospun nanofibrous samples were UV-cured using 1rgacure 12959 as radical photo-initiator and 1-Heptanol as water-immiscible photo-initiator carrier, resulting in the formation of a water-insoluble, gelatin/PCL covalent co-network. Scanning electron microscopy (SEM), attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, differential scanning calorimetry (DSC), tensile test, as well as liquid contact angle and swelling measurements were carried out to explore the surface morphology, chemical composition, thermal and mechanical properties, wettability and water holding capacity of the nanofibrous membranes, respectively. UV-cured nanofibrous membranes did not dissolve in water and showed enhanced thermal and mechanical properties, with respect to as-spun samples, indicating the effectiveness of the photo-crosslinking reaction. In addition, UV-cured gelatin/PCL membranes displayed increased structural stability in water with respect to PCL-free samples and were highly tolerated by G292 osteosarcoma cells. These results therefore support the use of PCL-DMA as hydrophobic, biodegradable crosslinker and provide new insight on the scalable design of water-insoluble, mechanical-competent gelatin membranes for healthcare applications.
    View publication