Contact
    Start Publications Application of a low-cost biosurfactant in heavy metal ...
    ←  Publication Finder
    Attension

    Application of a low-cost biosurfactant in heavy metal remediation processes

    Year: 2019

    Journal: Biodegradation, Volume 30, AUG, page 215–233

    Authors: da Rocha Junior, Rivaldo B.; Meira, Hugo M.; Almeida, Darne G.; Rufino, Raquel D.; Luna, Juliana M.; Santos, Valdemir A.; Sarubbo, Leonie A.

    Organizations: Brazilian fostering agency: National Council for Scientific and Technological Development (CNPq)Conselho Nacional de Desenvolvimento Cientifico e Tecnologico (CNPQ); Brazilian fostering agency: Coordination for the Evaluation and Improvement of Higher Education Personnel (CAPES)Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior (CAPES); Brazilian fostering agency: State of Pernambuco Assistance to Science and Technology Foundation (FACEPE); Brazilian fostering agency: National Electrical Energy Agency (ANEEL)

    Keywords: Biosurfactant; Candida tropicalis; Industrial residues; Environmental contamination; Heavy metals

    The industrial interest in microbial surfactants has intensified in recent years due to the characteristics of these compounds, such as biodegradability, low toxicity, and effectiveness in removing heavy metals and hydrophobic organic compounds from soil and water. This paper describes the production of a biosurfactant by the yeast Candida tropicalis grown in distilled water with 2.5% molasses, 2.5% frying oil and 4% corn steep liquor. The production of the biosurfactant reached 27g/l in a 50-l bioreactor with a surface tension of 30mN/m. Surface tension and engine oil emulsification assays demonstrated the stability of biosurfactant under extreme conditions of temperature and pH as well as in the presence of NaCl. Chemical structures of the biosurfactant were identified using GC-MS and NMR. The isolated biosurfactant was characterised as an anionic molecule capable of reducing the surface tension of water from 70 to 30mN/m at 0.5% of the critical micelle concentration, with no toxic effects on plant seeds or brine shrimp. In tests involving both the crude and isolated biosurfactant for the removal of heavy metals from contaminated sand under dynamic conditions, the removal rates for Zn and Cu ranged from 30 to 80%, while the best removal rate for Pb was 15%. Tests in packed columns also confirmed the ability of biosurfactant to remove Cu and Zn at rates ranging from 45 to 65%. However, lead was not removed under static conditions. The removal kinetics demonstrated that 30min was sufficient for the removal of metals and a single washing with the biosurfactant achieved greater removal efficiency. The use of the biosurfactant led to a significant reduction in the electrical conductivity of solutions containing heavy metals. The present findings as well as a brief economic analysis suggest the great potential of this agent for industrial remediation processes of soil and water polluted with inorganic contaminants.
    View publication