Contact
    Start Publications Characterization and Performance Evaluation of Cellulose ...
    ←  Publication Finder
    Attension

    Characterization and Performance Evaluation of Cellulose Acetate-Polyurethane Film for Lead II Ion Removal

    Year: 2020

    Journal: Polymers, Volume 12, JUN

    Authors: Iqhrammullah, M.; Marlina, Marlina; Khalil, H. P. S. Abdul; Kurniawan, K. H.; Suyanto, H.; Hedwig, R.; Karnadi, I; Olaiya, N. G.; Abdullah, C. K.; Abdulmadjid, S. N.

    Organizations: Universiti Sains MalaysiaUniversiti Sains Malaysia [FRGS-MRSA 203/PTEKIND/6711837]; Universitas Syiah Kuala [860/UN11/SPK/PNBP/2019]

    Keywords: cellulose acetate; polyurethane; film; adsorbent; environmental

    Global pollution from toxic metal waste has resulted in increased research on toxic metal adsorption. A cellulose acetate-polyurethane (CA-PU) film adsorbent was successfully prepared in this research. The cellulose acetate-polyurethane film adsorbent was prepared with a polycondensation reaction between cellulose acetate and methylene diphenyl diisocyanate. The CA-PU bond formation was confirmed by functional group analysis obtained from Fourier transform infrared (FTIR) spectroscopy. The obtained film was characterized for improved tensile and thermal properties with the addition of methylene diphenyl diisocyanate (MDI). The adsorption ability of the obtained film was evaluated with laser-induced breakdown spectroscopy (LIBS). The best film adsorbent from the LIBS was selected and studied for adsorption isotherm. The FTIR analysis confirmed the formation of the CA-PU bond from the polycondensation between cellulose acetate and the methylene diphenyl diisocyanate. The result showed that the addition of methylene diphenyl diisocyanate (MDI) resulted in the urethane network's growth. The characterization result showed an improvement in the morphology, thermal stability, and tensile strength of the film. The LIBS studies showed improvement in the adsorption of Pb(2+)with CA-PU compared with the neat CA. The isotherm studies revealed that Pb(2+)adsorption by cellulose acetate-polyurethane film adsorbent was heterogeneously dependent on the Freundlich isotherm model (R-2= 0.97044). Overall, the polycondensation method proposed by this study enhanced the Pb(2+)removal, and was comparable to those reported in previous studies.
    View publication