Contact
    Start Publications Colloidal Lignin Particles and Epoxies for Bio-Based, Durable, ...
    ←  Publication Finder
    Attension

    Colloidal Lignin Particles and Epoxies for Bio-Based, Durable, and Multiresistant Nanostructured Coatings

    Year: 2021

    Journal: ACS Appl. Mater. Interfaces, Volume 13, JUL 28, page 34793–34806

    Authors: Henn, Karl Alexander; Forsman, Nina; Zou, Tao; Osterberg, Monika

    Organizations: Business Finland [2117744]; Academy of Finland [318890, 318891]

    Keywords: lignin; lignin nanoparticles; nanostructured; epoxy; bio-based; surface coating

    There is a need for safe and sustainable alternatives in the coating industry. Bio-based coatings are interesting in this perspective. Although various oils and waxes have been used as traditional wood coatings, they often lack sufficient durability. Lignin is an abundant natural polyphenol that can be used to cure epoxies, but its poor water solubility has impeded the use of unmodified lignin in coatings in the past. To address this issue, water-dispersible colloidal lignin particles (CLPs) and an epoxy compound, glycerol diglycidyl ether (GDE), were used to prepare multiprotective bio-based surface coatings. With the GDE/CLP ratios of 0.65 and 0.52 gig, the cured CLP-GDE films became highly resistant to abrasion and heat. When applied as a coating on wooden substrates, the particulate morphology enabled effective protection against water, stains, and sunlight with very thin layers (less than half the weight of commercial coatings) while retaining the wood's breathability excellently. Optimal hydrophobicity was reached with a coat weight of 6.9 g(CLP)/m(2), resulting in water contact angle values of up to 120 degrees. Due to their spherical shape and chemical structure, the CLPs acted as both a hardener and a particulate component in the coating, which removed the need for an underlying binding polymer matrix. Light interferometry measurements showed that while commercial polymeric film-forming coatings smoothened the substrate noticeably, the particulate morphology retained the substrate's roughness in lightweight coatings, allowing for a high water contact angle. This work presents new strategies for lignin applications in durable particulate coatings and their advantages compared to both currently used synthetic and bio-based coatings.
    View publication