Contact
    Start Publications Combined quartz crystal microbalance with dissipation (QCM-D) ...
    ←  Publication Finder
    QSense

    Combined quartz crystal microbalance with dissipation (QCM-D) and generalized ellipsometry (GE) to characterize the deposition of titanium dioxide nanoparticles on model rough surfaces

    Year: 2017

    Journal: J. Hazard. Mater., Volume 322, JAN 15, page 118–128

    Authors: Kananizadeh, Negin; Rice, Charles; Lee, Jaewoong; Rodenhausen, Keith B.; Sekora, Derek; Schubert, Mathias; Schubert, Eva; Bartelt-Hunt, Shannon; Li, Yusong

    Keywords: Quartz crystal microbalance; Rough surfaces; Engineered nanoparticles; Nanoparticle deposition; Generalized ellipsometry

    Measuring the interactions between engineered nanoparticles and natural substrates (e.g. soils and sediments) has been very challenging due to highly heterogeneous and rough natural surfaces. In this study, three-dimensional nanostructured slanted columnar thin films (SCTFs), with well-defined roughness height and spacing, have been used to mimic surface roughness. Interactions between titanium dioxide nanoparticles (TiO2NP), the most extensively manufactured engineered nanomaterials, and SCTF coated surfaces were measured using a quartz crystal microbalance with dissipation monitoring (QCM-D). In parallel, in-situ generalized ellipsometry (GE) was coupled with QCM-D to simultaneously measure the amount of TiO2NP deposited on the surface of SCTF. While GE is insensitive to effects of mechanical water entrapment variations in roughness spaces, we found that the viscoelastic model, a typical QCM-D model analysis approach, overestimates the mass of deposited TiO2NP. This overestimation arises from overlaid frequency changes caused by particle deposition as well as additional water entrapment and partial water displacement upon nanoparticle adsorption. Here, we demonstrate a new approach to model QCM-D data, accounting for both viscoelastic effects and the effects of roughness-retained water. Finally, the porosity of attached TiO2NP layer was determined by coupling the areal, mass density determined by QCM-D and independent GE measurements. (C) 2016 Elsevier B.V. All rights reserved.
    View publication