Contact
    Start Publications Development of three-dimensional printing filaments based on ...
    ←  Publication Finder
    Attension

    Development of three-dimensional printing filaments based on poly(lactic acid)/hydroxyapatite composites with potential for tissue engineering

    Year: 2021

    Journal: J. Compos Mater., Volume 55, JUL, page 2289–2300

    Authors: Bernardo, Marcela Piassi; Rodrigues da Silva, Bruna Cristina; Capparelli Mattoso, Luiz Henrique

    Organizations: CNPq; FAPESP [2018/07860-9]; Agronano network; SISNANO/MCTI

    Keywords: Bone reconstruction; solvent-free route; thermal properties; contact angle; green alternative

    Injured bone tissues can be healed with scaffolds, which could be manufactured using the fused deposition modeling (FDM) strategy. Poly(lactic acid) (PLA) is one of the most biocompatible polymers suitable for FDM, while hydroxyapatite (HA) could improve the bioactivity of scaffold due to its chemical composition. Therefore, the combination of PLA/HA can create composite filaments adequate for FDM and with high osteoconductive and osteointegration potentials. In this work, we proposed a different approache to improve the potential bioactivity of 3D printed scaffolds for bone tissue engineering by increasing the HA loading (20-30%) in the PLA composite filaments. Two routes were investigated regarding the use of solvents in the filament production. To assess the suitability of the FDM-3D printing process, and the influence of the HA content on the polymer matrix, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and scanning electron microscopy (SEM) were performed. The HA phase content of the composite filaments agreed with the initial composite proportions. The wettability of the 3D printed scaffolds was also increased. It was shown a greener route for obtaining composite filaments that generate scaffolds with properties similar to those obtained by the solvent casting, with high HA content and great potential to be used as a bone graft.
    View publication