Contact
    Start Publications Emulsion Gels as Precursors for Porous Silicones and ...
    ←  Publication Finder
    Attension

    Emulsion Gels as Precursors for Porous Silicones and All-Polymer Composites-A Proof of Concept Based on Siloxane Stabilizers

    Year: 2022

    Journal: Gels, Volume 8, JUN

    Authors: Racles, Carmen; Bele, Adrian; Vasiliu, Ana-Lavinia; Sacarescu, Liviu

    Organizations: Ministry of Research, Innovation, and Digitization, CNCS/CCCDI-UEFISCDI within PNCDI III [PN-III-P1-1_1-TE-2021-0156]; Ministry of Research, Innovation, and Digitization, CNCS/CCCDI-UEFISCDI [PN-III-P2-2.1-PED-2019-1885, 463/2020]

    Keywords: amphiphilic siloxanes; emulsion gels; polysiloxanes; porous silicones; xerogels; negative interfacial tension; emulsion templating

    In spite of its versatility, the emulsion templating method is rather uncommon for the preparation of porous silicones. In this contribution, two siloxane-containing stabilizers, designed to be soluble in polar (water) and non-polar (toluene) solvents, respectively, were used in low concentrations to produce stable emulsions, wherein polysiloxane gels were obtained by UV-photoinitiated thiol-ene click cross-linking. The stabilizers exhibited negative interfacial tension, as measured by Wilhelmy plate tensiometry. The emulsion gels evolved into porous silicones (xerogels), with tunable morphology and properties. According to TEM and SEM investigations, the emulsion template was preserved in the final materials. Several parameters (e.g., the structure of the polysiloxane precursors, composition of the emulsion gels, nature of the continuous phase, cross-linking conditions, or additives) can be varied in order to obtain porous elastic materials with desired properties, such as Janus membranes, absorbent monoliths, all-polymer porous composites, or silicone-swollen gels. The feasibility of these types of materials was tested, and exemplary porous silicones were briefly characterized by contact angle measurements, mechanical testing, and absorption tests. The proposed method is simple, fast, and economic, uses very little amounts of stabilizers, and can be adjusted as a green technique. In this contribution, all the silicon-based materials with a convenient design were prepared in house.
    View publication