Contact
    Start Publications Enhancement in the Physico-Mechanical Functions of Seaweed ...
    ←  Publication Finder
    Attension

    Enhancement in the Physico-Mechanical Functions of Seaweed Biopolymer Film via Embedding Fillers for Plasticulture Application-A Comparison with Conventional Biodegradable Mulch Film

    Year: 2019

    Journal: Polymers, Volume 11, FEB

    Authors: Hasan, M.; Chong, E. W. N.; Jafarzadeh, Shima; Paridah, M. T.; Gopakumar, Deepu A.; Tajarudin, H. A.; Thomas, Sabu; Khalil, H. P. S. Abdul

    Keywords: bio-degradable polymer film; seaweed polymer; plasticulture application; conventional film; calcium carbonate

    This study aimed to compare the performance of fabricated microbially induced precipitated calcium carbonate- (MB-CaCO3) based red seaweed (Kappaphycus alvarezii) bio-polymer film and commercial calcium carbonate- (C-CaCO3) based red seaweed bio-film with the conventional biodegradable mulch film. To the best of our knowledge, there has been limited research on the application of commercial CaCO3 (C-CaCO3) and microbially induced CaCO3 (MB-CaCO3) as fillers for the preparation of films from seaweed bio-polymer and comparison with biodegradable commercial plasticulture packaging. The results revealed that the mechanical, contact angle, and biodegradability properties of the polymer composite films incorporated with C-CaCO3 and MB-CaCO3 fillers were comparable or even superior than the conventional biodegradable mulch film. The seaweed polymer film incorporated with MB-CaCO3 showed the highest contact angle of 100.94 degrees, whereas conventional biodegradable mulch film showed a contact angle of 90.25 degrees. The enhanced contact angle of MB-CaCO3 resulted in high barrier properties, which is highly desired in the current scenario for plasticulture packaging application. The water vapor permeability of MB-CaCO3 based seaweed films was low (2.05 +/- 1.06 g.m/m(2).s.Pa) when compared to conventional mulch film (2.68 +/- 0.35 g.m/m(2).s.Pa), which makes the fabricated film an ideal candidate for plasticulture application. The highest tensile strength (TS) was achieved by seaweed-based film filled with commercial CaCO3 (84.92% higher than conventional mulch film). SEM images of the fractured surfaces of the fabricated films revealed the strong interaction between seaweed and fillers. Furthermore, composite films incorporated with MB-CaCO3 promote brighter film, better water barrier, hydrophobicity, and biodegradability compared to C-CaCO3 based seaweed polymer film and conventional mulch film. From this demonstrated work, it can be concluded that the fabricated MB-CaCO3 based seaweed biopolymer film will be a promising candidate for plasticulture and agricultural application.
    View publication