Contact
    Start Publications Fabrication and Characterization of Carboxymethyl ...
    ←  Publication Finder
    Attension

    Fabrication and Characterization of Carboxymethyl Starch/Poly(l-Lactide) Acid/beta-Tricalcium Phosphate Composite Nanofibers via Electrospinning

    Year: 2019

    Journal: Polymers, Volume 11, SEP

    Authors: Yusof, Mohd Reusmaazran; Shamsudin, Roslinda; Zakaria, Sarani; Hamid, Muhammad Azmi Abdul; Yalcinkaya, Fatma; Abdullah, Yusof; Yacob, Norzita

    Organizations: Fundamental Research Grant Scheme [FRGS/1/2018/STG07/UKM/02/03]; European Structural and Investment Funds [CZ.02.1.01/0.0/0.0/16_019/0000843]

    Keywords: poly l-lactide (PLLA); carboxymethyl starch (CMS); beta-tricalcium phosphate (beta-TCP); electrospinning; nanofibers

    A natural polymer of carboxymethyl starch (CMS) was used in combination with the inorganic mineral of beta-Tricalcium Phosphate (beta-TCP) and Poly L-lactide (PLLA) to prepare composite nanofibers with the potential to be used as a biomedical membrane. beta-TCP contents varied in the range of 0.25% to 1% in the composition of PLLA and CMS. A mixed composition of these organic and inorganic materials was electro-spun to produce composite nanofibers. Morphological investigation indicated that smooth and uniform nanofibers could be produced via this technique. The average of the nanofiber diameters was slightly increased from 190 to 265 nm with the beta-TCP content but some agglomeration of particles began to impede in the fiber at a higher content of beta-TCP. It was observed that the fibers were damaged at a higher content of beta-TCP nanoparticles. With the presence of higher beta-TCP, the wettability of the PLLA was also improved, as indicated by the water contact angle measurement from 127.3 degrees to 118 degrees. The crystallization in the composite decreased, as shown in the changes in glass transition (T-g) and melting temperature (T-m) by differential scanning calorimeter (DSC) and X-ray diffraction analysis. Increases in beta-TCP contributed to weaker mechanical strength, from 8.5 to 5.7 MPa, due to imperfect fiber structure.
    View publication