Contact
    Start Publications Functionalized-MXene Thin-Film Nanocomposite Hollow Fiber ...
    ←  Publication Finder
    Attension

    Functionalized-MXene Thin-Film Nanocomposite Hollow Fiber Membranes for Enhanced PFAS Removal from Water

    Year: 2022

    Journal: ACS Appl. Mater. Interfaces, Volume 14, JUN 8, page 25397–25408

    Authors: Le, Tin; Jamshidi, Elnaz; Beidaghi, Majid; Esfahani, Milad Rabbani

    Organizations: Department of the Interior (DOI) Bureau of Reclamation (BR) [R19AC00087]; United States Geological Survey (USGS) [20-WRC-207214]; Environmental Protection Agency (EPA) [84014501]; National Science Foundation [OAI-1929195]

    Keywords: MXene nanosheets; PFAS removal; per- and polyfluoroalkyl substances (PFAS); NF membrane; MXene-TFN membranes

    Due to adverse health effects and the broad sources of per- and polyfluoroakyl substances (PFAS), PFAS removal is a critical research area in water purification. We demonstrate the functionalization of thin-film composite (TFC) hollow fiber nanofiltration (HFN) membranes by MXene nanosheets during the interfacial polymerization (IP) process for enhanced removal of perfluorooctane sulfonic acid (PFOS) from water. A MXene-polyamide (PA) selective layer was fabricated on top of a polysulfone (PSF) hollow fiber support via IP of trimesoyl chloride (TMC) and a mixture of piperazine (PIP) and MXene nanosheets to form MXene-PA thin-film nanocomposite (TFN) membranes. Incorporating MXene nanosheets during the IP process tuned the morphology and negative surface charge of the selective layer, resulting in enhanced PFOS rejection from 72% (bare TFC) to more than 96% (0.025 wt % MXene TFN), while the water permeability was also increased from 13.19 (bare TFC) to 29.26 LMH/bar (0.025 wt % MXene TFN). Our results demonstrate that both electrostatic interaction and size exclusion are the main factors governing the PFOS rejection, and both are determined by PA selective layer structural and chemical properties. The lamella structure and interlayer of MXene nanosheets inside the PA layer provided different transport mechanisms for water, ions, and PFAS molecules, resulting in enhanced water permeability and PFAS rejection due to traveling through the membrane by both diffusions through the PA layer and the MXene intralayer channels. MXene nanosheets showed very promising capability as a 2D additive for tuning the structural and chemical properties of the PA layer at the permeability-rejection tradeoff.
    View publication