Contact
    Start Publications Improving membrane distillation performance: Morphology ...
    ←  Publication Finder
    Attension

    Improving membrane distillation performance: Morphology optimization of hollow fiber membranes with selected non-solvent in dope solution

    Year: 2019

    Journal: Chemosphere, Volume 230, SEP, page 117–126

    Authors: Yao, Minwei; Ren, Jiawei; Akther, Nawshad; Woo, Yun Chul; Tijing, Leonard D.; Kim, Seung-Hyun; Shon, Ho Kyong

    Organizations: Korea Ministry of Environment (MOE); Korea Environmental Industry & Technology Institute (KEITI) [146667]; Australian Government Research Training Program ScholarshipAustralian GovernmentDepartment of Industry, Innovation and Science; ARC Future FellowshipAustralian Research Council [FT140101208]

    Keywords: Hollow fiber membrane; Membrane distillation; NIPS; Morphology; Non-solvent; Crystallinity

    This study aimed at improving membrane distillation (MD) performance by mixing various non-solvents (NSs) in polymer dope solutions. The effect of each NS on the inner structure and surface morphology of hollow fiber (HF) membrane was investigated. Membrane morphology is manipulated by controlling liquid-liquid (L-L) and solid-liquid (S-L) demixing time, which is a function of the viscosity and water affinity of dope solutions. Consequently, the addition of NSs altered membrane morphology by affecting the diffusion rate during NS induced phase separation (NIPS) process. The performance results showed that the dope solution composed of 11/71.2/17.8 wt% polyvinylidene fluoride (PVDF)/triethyl phosphate (TEP)/toluene produced the most promising HF membrane for MD. The optimal membrane demonstrated a unique bicontinuous structure with increased porosity and mean pore size. The addition of toluene as NS in dope solutions enhanced crystallization process, which increased the Young's modulus of membrane but slightly decreased its maximum tensile strength at break. The optimal PVDF HF membrane demonstrated a steady flux of 18.9 LMH at 60 degrees C/20 degrees C of feed/permeate temperatures and a salt rejection of 99.99% when tested for 72 h. The results suggest that incorporation of toluene as a NS into PVDF dope solutions can increase permeation performance in MD by enhancing the morphology of HF membranes. (C) 2019 Elsevier Ltd. All rights reserved.
    View publication