Contact
    Start Publications Modeling Experimental Parameters for the Fabrication of ...
    ←  Publication Finder
    Attension

    Modeling Experimental Parameters for the Fabrication of Multifunctional Surfaces Composed of Electrospun PCL/ZnO-NPs Nanofibers

    Year: 2021

    Journal: Polymers, Volume 13, DEC

    Authors: Rivero, Pedro J.; Fuertes, Juan P.; Vicente, Adrian; Mata, Alvaro; Palacio, Jose F.; Monteserin, Maria; Rodriguez, Rafael

    Organizations: ERDF A way of making Europe [RTI2018-096262-B-C41-MAITAI, PJUPNA1929]; ESF Investing in your future [PRE2019-090656]; BEI

    Keywords: PCL; electrospinning; ZnO nanoparticles; DoE; wettability; corrosion rate

    In this work, a one-step electrospinning technique has been implemented for the design and development of functional surfaces with a desired morphology in terms of wettability and corrosion resistance by using polycaprolactone (PCL) and zinc oxide nanoparticles (ZnO NPs). The surface morphology has been characterized by confocal microscopy, scanning electron microscopy (SEM), atomic force microscopy (AFM) and water contact angle (WCA), whereas the corrosion resistance has been evaluated by Tafel polarization curves. Strict control over the input operational parameters (applied voltage, feeding rate, distance tip to collector), PCL solution concentration and amount of ZnO NPs have been analyzed in depth by showing their key role in the final surface properties. With this goal in mind, a design of experiment (DoE) has been performed in order to evaluate the optimal coating morphology in terms of fiber diameter, surface roughness (Ra), water contact angle (WCA) and corrosion rate. It has been demonstrated that the solution concentration has a significant effect on the resultant electrospun structure obtained on the collector with the formation of beaded fibers with a higher WCA value in comparison with uniform bead-free fibers (dry polymer deposition or fiber-merging aspect). In addition, the presence of ZnO NPs distributed within the electrospun fibers also plays a key role in corrosion resistance, although it also leads to a decrease in the WCA. Finally, this is the first time that an exhaustive analysis by using DoE has been evaluated for PCL/ZnO electrospun fibers with the aim to optimize the surface morphology with the better performance in terms of corrosion resistance and wettability.
    View publication