Contact
    Start Publications Realization of Microfluidic Paper-Based Analytical Devices ...
    ←  Publication Finder
    Attension

    Realization of Microfluidic Paper-Based Analytical Devices Using a 3-D Printer: Characterization and Optimization

    Year: 2019

    Journal: IEEE Trans. Device Mater. Reliab., Volume 19, SEP, page 529–536

    Authors: Puneeth, S. B.; Salve, Mary; Akshatha, R.; Goel, Sanket

    Keywords: 3D printer (3DP); chromatography paper; fused-deposition modelling (FDM); microfluidic-paper based analytical devices (mu PADs); polycaprolactone (PCL)

    Microfluidic paper-based analytical devices (mu PADs) are a clean-room free, cost-effective, and self-pumping flow-based rapid prototyping technique, which is compatible with a varying range of fluids. Until now, mu PADs have been primarily fabricated using crayons, and plotting-machine and solid-ink printers. These devices can be easily employed for various detection schemes, such as electrical, electrochemical, and optical. The presence of a capillary effect in the chromatograph paper has made mu PADs independent of a passive device, such as pumps and valves. In this paper, an alternative and a novel method is proposed to achieve the mu PADs effortlessly using a 3-D printer (3DP), which has many advantages over the existing methods. For creating hydrophobic barriers for microchannel walls, polycaprolactone (PCL) filament was used with fused-deposition modeling (FDM) 3DP. PCL filaments were deposited on the chromatography paper followed by heating for determining the overall dimension and depth of the microchannel at which PCL melts and penetrates into this paper. The mu PADs are characterized and optimized for two parameters. First, fabrication parameters, such as heating temperature and time duration, were used for the creation of the hydrophobic barrier using a hot air oven. Second, the microchannel parameters, such as microchannel width, boundary thickness, chromatography paper grade, and microchannel source shape (rectangular, triangular, and circular) were used for the fluid-flow by measuring the time taken by fluid to travel a fixed length of the microchannel. After rigorous analysis, it was found that for the creation of the hydrophobic barrier, mu PADs heated between temperature 120 degrees C to 150 degrees C require 30 min. Under optimized conditions for the fluid flow, the chromatography paper grade 1441 with a triangular source microchannel was found to be best. This paper provides an alternate, simple, and optimized method toward the development of the application-specific mu PADs, such as the micro-viscometer, which, in turn, can be widely used to monitor various types of fluids including human bodily fluids.
    View publication