Contact
    Start Publications Selective Laser Melting and Electron Beam Melting of Ti6Al4V ...
    ←  Publication Finder
    Attension

    Selective Laser Melting and Electron Beam Melting of Ti6Al4V for Orthopedic Applications: A Comparative Study on the Applied Building Direction

    Year: 2020

    Journal: Materials, Volume 13, DEC

    Authors: Ginestra, Paola; Ferraro, Rosalba Monica; Zohar-Hauber, Keren; Abeni, Andrea; Giliani, Silvia; Ceretti, Elisabetta

    Organizations: Israel-Italy Joint Innovation Program for Research and Development Cooperation in Industrial, Scientific and Technological fields in R&D (Industrial Track, Grant Name: OPTIMIB)

    Keywords: powder bed fusion; selective laser melting; electron beam melting; building orientation; titanium; osseointegration

    The 3D printing process offers several advantages to the medical industry by producing complex and bespoke devices that accurately reproduce customized patient geometries. Despite the recent developments that strongly enhanced the dominance of additive manufacturing (AM) techniques over conventional methods, processes need to be continually optimized and controlled to obtain implants that can fulfill all the requirements of the surgical procedure and the anatomical district of interest. The best outcomes of an implant derive from optimal compromise and balance between a good interaction with the surrounding tissue through cell attachment and reduced inflammatory response mainly caused by a weak interface with the native tissue or bacteria colonization of the implant surface. For these reasons, the chemical, morphological, and mechanical properties of a device need to be designed in order to assure the best performances considering the in vivo environment components. In particular, complex 3D geometries can be produced with high dimensional accuracy but inadequate surface properties due to the layer manufacturing process that always entails the use of post-processing techniques to improve the surface quality, increasing the lead times of the whole process despite the reduction of the supply chain. The goal of this work was to provide a comparison between Ti6Al4V samples fabricated by selective laser melting (SLM) and electron beam melting (EBM) with different building directions in relation to the building plate. The results highlighted the influence of the process technique on osteoblast attachment and mineralization compared with the building orientation that showed a limited effect in promoting a proper osseointegration over a long-term period.
    View publication