Contact
    Start Publications Surface Finishing of 3D-Printed Polymers with Selected Coatings
    ←  Publication Finder
    Attension

    Surface Finishing of 3D-Printed Polymers with Selected Coatings

    Year: 2020

    Journal: Polymers, Volume 12, DEC

    Authors: Zigon, Jure; Kariz, Mirko; Pavlic, Matjaz

    Organizations: Slovenian Research AgencySlovenian Research Agency - Slovenia [P4-0015]; (lignocellulose composites")

    Keywords: acrylonitrile-butadiene-styrene; coating; fused deposition modeling; poly(lactic acid); polymers; surface; wood

    Surface treatment of 3D-printed objects with coatings, besides protection against environmental influences, offers the improvement of visual appearance of the printed elements. In order to design an optimum surface system, the physical and chemical properties of polymers surfaces should be well-known. In the present study, 3D-printed samples of acrylonitrile-butadiene-styrene, poly(lactic acid) and poly(lactic acid) with wood flour additive were coated with three different types of coating, namely solvent borne alkyd coating, water borne acrylic coating and coating made of acrylonitrile-butadiene-styrene diluted in acetone. The surface properties of substrates and the properties of surface systems were assessed with different methods. The results revealed the surfaces of polymers having hydrophobic character, whereas the color, gloss, surface roughness and coating film thickness of coated surfaces depend on the characteristics of particular coatings. Finally, the adhesion of coatings was shown to be appropriate, but dependent on substrate surface porosity and chemical properties of both substrate surface and coating asset.
    View publication