Interfacial properties and microfailure degradation mechanisms of bioabsorbable fibers/poly-L-lactide composites using micromechanical test and nondestructive acoustic emission*

Interfacial properties and microfailure degradation mechanisms of the bioabsorbable composites for implant materials were investigated using micromechanical technique and nondestructive acoustic emission (AE). The tensile strength of absorbable fibers with hydrolysis was analyzed statistically using either uni- or bimodal Weibull distribution. As hydrolysis time increased, the tensile strength, the modulus and the elongation of poly(ester-amide) (PEA) and bioactive glass fibers decreased, whereas those of chitosan fiber almost did not change. Interfacial shear strength (IFSS) between bioactive glass .ber and poly-l-lactide (PLLA) was much higher than PEA or chitosan fiber/PLLA systems using dual matrix composite (DMC) specimen. The decreasing rate of IFSS was the fastest in bioactive glass .ber/PLLA composites whereas that of chitosan fiber/PLLA composites was the slowest. Work of adhesion, W_a between bioactive glass fiber and PLLA was the highest, and the wettability results were consistent with the IFSS. AE energies of PEA fiber decreased gradually, and their distributions became narrower than those in the initial state with hydrolysis time. In case of bioactive glass fiber, AE energies in tensile failure were much higher than those in compression. In addition, AE parameters at the initial state were much higher than those after degradation under both tensile and compressive tests. Interfacial properties and microfailure degradation mechanisms can be important factors to control bioabsorbable composite performance.