Contact
    Start Publications Ultraviolet Light Treatment of Thin High-Density Polyethylene ...
    ←  Publication Finder
    QSense

    Ultraviolet Light Treatment of Thin High-Density Polyethylene Films Monitored with a Quartz Crystal Microbalance

    Year: 2004

    Journal: J. App. Pol. Sci., 2004, 92, 2833-2839, 20100827

    Authors: Kihlman Øiseth S., Krozer A., Lausmaa J., Kasemo B.

    Last authors: B. Kasemo

    Organizations: Department of Applied Physics, Chalmers University of Technology, SE-412 96 Goteborg,Sweden, Imego Institute, Arvid Hedvalls backe 4, SE-411 33 Goteborg, Sweden and Department of Chemistry and Materials Technology, SP Swedish National Testing and Research Institute, SE-50115 Borås, Sweden

    Country: Sweden

    Ultraviolet (UV) treatment is an effective method for modification of the surface properties of polymeric materials. In this study, the effects of the ozone generating UV light treatment of thin high-density polyethylene (HDPE) films were monitored with the quartz crystal microbalance (QCM) technique both in the presence of ozone and without it. The films were further characterized by X-ray photoelectron spectroscopy, optical microscopy, and atomic force microscopy. We found that the ozone not only modified the surface properties of the HDPE films but also etched away the polymer layer. An average etching rate of 0.48 nm/min was determined. UV light exposure of the polymer film in an argon atmosphere resulted only in minor degradation of the films; the presence of ozone was needed to cause the destruction and loss of material. The QCM technique was a straightforward method for the monitoring of the kinetics of the ablation induced by the UV-ozone treatment process.