Contact
    Start Publications Effect of Zirconium Doping on Electrical Properties of Aluminum ...
    ←  Publication Finder
    Attension

    Effect of Zirconium Doping on Electrical Properties of Aluminum Oxide Dielectric Layer by Spin Coating Method with Low Temperature Preparation

    Year: 2020

    Journal: Coatings, Volume 10, JUL

    Authors: Zhou, Yue; Liang, Zhihao; Yao, Rihui; Zuo, Wencai; Zhou, Shangxiong; Zhu, Zhennan; Wang, Yiping; Qiu, Tian; Ning, Honglong; Peng, Junbiao

    Organizations: Key-Area Research and Development Program of Guangdong Province [2020B010183002]; National Natural Science Foundation of ChinaNational Natural Science Foundation of China (NSFC) [51771074, 61574061]; Major Integrated Projects of National Natural Science Foundation of ChinaNational Natural Science Foundation of China (NSFC) [U1601651]; Guangdong Major Project of Basic and Applied Basic Research [2019B030302007]; Science and Technology Project of Guangzhou [201904010344]; Fundamental Research Funds for the Central UniversitiesFundamental Research Funds for the Central Universities [2019MS012]; Ji Hua Laboratory scientific research project [X190221TF191]

    Keywords: zirconium doping; aluminum oxide; spin coating; low temperature annealing; dielectric layer

    In recent years, significant efforts have been devoted to the research and development of spin-coated Al(2)O(3)thin films, due to their large band gaps, high breakdown voltage and stability at high annealing temperature. However, as the alumina precursor has a large surface energy, substrates need to be treated by plasma before spin coating. Therefore, to avoid the expensive and process-complicated plasma treatment, we incorporated zirconium nitrate into the aluminum nitrate solution to decrease the surface energy of the precursor which improve the spreadability. Then, the electrical performances and the surface morphologies of the films were measured. For comparison, the pure Al(2)O(3)films with plasma treatments were also prepared. As a result, after low temperature annealing (200 degrees C), the relative dielectric constant of Zr-AlO(x)spin-coated thin-film MIM (Metal-Insulator-Metal) devices can reach 12 and the leakage current density is not higher than 7.78 x 10(-8)A/cm(2)@ 1 MV/cm when the concentration of zirconium nitrate is 0.05 mol/L. The Aluminum oxide film prepared by zirconium doping has higher stability and better electrical properties than the pure films with plasma treatments and high performance can be attained under low-temperature annealing, which shows its potential application in printing and flexible electronic devices.
    View publication