> 15 min

A set of technologies to use in a biointerfaces lab

The range of technologies that could be used in a biointerfaces lab is vast. We talked to Dr. Jenny Malmstrom, University of Auckland to learn more.

< 5 min

Wettability of fiber reinforced composites

For the mechanical performance of the composite, the adhesion between fiber and the matrix is of utmost importance.

> 7 min

Analyzing CMP slurry additive interaction with a ceramic surface

Read this case example where QSense QCM-D was used to analyze the interaction between a ceramic surface and different slurry additives.

< 3 min

Hydrophobic surfaces – How hydrophobic coatings are used and studied?

Hydrophobic coatings are used in many consumers products. Contact angle measurements can be used to study them.

~ 10 min

Combined QCM-D and Ellipsometry – how to setup the data capture

Read about how to setup the data capture of a combined QCM-D and ellipsometry measurement.

Explore the blog

You have only scratched the surface.