wettability alteration in carbonates
Susanna Laurén Apr 30, ’19 > 2 min

How to alter wettability in carbonate reservoir?

It is estimated that 50 to 60 % of the world’s oil is in carbonate reservoirs. Recovery factor for all types of reservoirs is about 35 %. However, it is typically lower for carbonates than sandstone reservoirs. There are several reasons for this, but one of them is related to wettability. Carbonate reservoirs are characterized as intermediate to oil- wet. This leads to a tendency of the oil to adhere strongly on the rock surface inhibiting the oil recovery with the non-wetting phase injection such as water flooding. Altering the wettability of the carbonates has been proposed as one of the main mechanisms for enhanced oil recovery.

Wettability alteration in enhanced oil recovery

The main factors affecting wettability alteration are oil composition, brine chemistry, rock surface morphology and the system temperature, pressure and saturation history. Enhanced oil recovery (EOR) methods used in carbonate reservoirs can be divided into three categories; gas, chemical and thermal methods.

Wettability alteration can happen due to various mechanisms depending on the enhanced oil recovery methods used. In chemical flooding for example, used surfactants will adsorb on the rock surface causing changes in the wetting behavior. Different types of nanoparticles and nanofluids have also gained a lot of interested as EOR chemicals. Low salinity water flooding is another heavily investigated method. There, the wettability alteration mechanisms are not completely understood but it is thought to be related to interactions of ions such as Na+ and Ca2+ with the rock surface.

To read more about wettability alteration in carbonate reservoirs, please download the overview below.

Overview  Wettability alteration in carbonate reservoir  Download


Explore the blog

You have only scratched the surface.



View all